14 Days of LillyBelle... Day 14. Fabric File Portfolio
Whew! Wiping the sweat from my brow. The last project is finally done. And 14 projects in 21 days? I'll call that a success.
I hope you have enjoyed this series. I look forward to doing another (um... shorter) series when Splendor 1920 arrives in stores. Here is the 14th project. It was inspired by the loads of paper I picked up today for school registration. Happy Sewing!


You'll need:
1/2 yard of double sided fusible heavy Pellon
1/2 yard each of two contrasting fabrics
1/4 yard each of two constrasting fabrics for binding
Cutting:
1 each ON FOLD - 13" x 9 1/2" - 2 contrasting fabrics and pellon (opens to 13" x 19")
2 - 3" x WOF strips for binding on top and ties
1 - 3" x WOF strip for binding on sides
Step by Step:
1. Press each piece of fabric to opposite sides of the pellon. (wrong side faces the pellon)
2. Make binding and ties (see day 11 curtains for how to make binding except you won't need to attach pieces together for extra length as on the curtains).
3. For the ties, take one WOF piece of binding and cut it in half. Finish the ends by opening the folded binding on one short end. Fold the end in half wrong sides together and sew a 1/4" seam allowance along the short end. Turn the binding back so it is folded properly. Edge stitch the open side of the binding closed. Set aside.
4. With the "portfolio" open, sew binding onto each top edge (again, see curtains day 11 for binding instructions).
5. Sew the ties on. With the "portfolio" open, mark the middle of the top edge of each side of the folder. Place the raw short edge of the tie at the top of the folder at the mid point, just below where you've sewn on the binding. Along the short raw edge of the tie, sew the tie on using a scant 1/4" seam allowance. Flip the tie up, and sew it on (enclosing the raw edge) 1/4" above the fold. Repeat for the other tie.
6. Sew the side binding on. Cut two pieces of binding that are each 10 1/2". Fold the "portfolio" in half. Open the binding, and place it on top of the front of the folder along one raw edge. Leave an extra 1/2" at the top and an extra 1/2" at the bottom. Sew the binding through the two layers of the folder following the pressed fold as you did for the other pieces of binding. Flip the binding to the back, fold in the two raw edges at the top and the bottom, and press in place. Edge stitch the binding from the front as you did before.